Tracer Wire for Buried Pipelines

Source: Hengtong Electric Published: 2022-06-21 0 views

The special metal tracer wire is composed of a special metal wire core (copper-clad steel) and PE outer protective layer, and the cross-sectional area is mostly 205-7mm².
Performance: Metal tracer wire, using PE as the outer protective layer, insulation, anti-corrosion, waterproof, and anti-aging. It has been applied in the metal tracer wire in Europe and the United States for more than 20 years, and has a good economic effect. At present, the metal tracer wire is mostly used as the tracer wire of the Pe pipe in China.

The tracer wire effectively solves the problem that non-metal pipelines cannot be probed with metal pipelines, and can be widely used in the search and positioning of underground non-metal pipe networks such as gas, water supply pipelines and drainage lines.

1. After the pipeline is laid, the exploratory traces that have been laid should be tested by using the pipeline detector to ensure that the wire is properly connected, and the test results should be recorded.

2. Connect the metal wire of the tracer wire to the transmitter input end of the pipeline locator, and the grounding end of the transmitter should be as far away from the transmitter as possible, and the grounding of the grounding pile or the electric pole should be used to reduce the grounding resistance.

3. Use the receiver to detect the received transmit signal, you can find the displacement and buried depth of the pipe.

Previous: Tracer Wire Spools

Next: Utility Tracer Wire Coils

Tracer Wire for Buried Pipelines

Related Articles

Related Products