It is easy to be led into a misunderstanding when purchasing warning tapes, and it is easy to cause enterprises to cut corners due to their own imagination. Therefore, enterprises should pay attention to the following aspects when purchasing cable warning tapes:

1, Smell the smell. If the smell is strong and there is a sour smell, the retention of this warning tape is very poor. Especially in the low temperature environment, it will crack when it is basically stuck on the carton. When the smell is thicker, the initial adhesion is still very sticky, but soon the adhesive surface will be dry and lose its adhesive property. At that time, there will be cracks on the surface of the warning tape. Because of uneven gluing.

2, Look at the brightness of the film. Generally, poor quality warning tapes are dark in color. This kind of warning tape has a high probability of breaking and poor strength.

3, The thickness of the hand felt film and the hard felt warning tape are generally inferior, and the actual number of meters will decrease due to the thickness of the film. The films used for good warning tapes are relatively soft and have good hand stretch.

4, Look at the color. Generally, the whiter the appearance of the transparent warning tape, the less impurities in the warning tape, so as to ensure the normal glue viscosity. The warning tape below 100 meters has a certain transparency to see the paper tube. Check the yellow warning tape to see if there are irregular white spots on the surface of the warning tape. Impurities or glue dry marks that cannot be wiped out by hand. This product usually has an odor.

For different buyers, under the guidance of some edifying sellers, they may go into the wrong zone and buy uneconomical goods. So today, the manufacturer has prepared four ways to prevent the wrong zone. The above content is the explanation of the problem. If you have any doubts or need, please come to our website http://webtest2.daoshangbao.cn Consult and see!