How to correctly set cable marker posts? This problem is still critical to the use of cable marker posts. The following sections will explain it to you.

1. The cable marker post shall be set at an eye-catching position related to safety so that the personnel entering the site can see it easily and have enough time to pay attention to its contents. Environmental information signs should be set at the entrances and eye-catching places of relevant places; Local information signs shall be set at the corresponding hazardous locations involved or eye-catching places near the equipment (components).

2. The cable marker post shall not be set on movable objects such as doors, windows and frames, so as to avoid that the cable marker post cannot be seen after these objects move. No obstacles shall be placed in front of the cable marker post to prevent reading.

3. When multiple cable marker posts are set together, they shall be arranged from left to right and from top to bottom in the order of prohibition, command and prompt types.

4. The fixing methods of cable marker posts are divided into three types: attached type, suspended type and column type. The suspension type and attached type shall be fixed firmly without inclination, and the column type signboard and bracket shall be firmly connected together. The signboard of temporary hanging pole shall be protected from falling off, and the temporary signboard hung outdoors shall be protected from wind overturning, and shall be made into double-sided signboards.

5. The cable marker post shall be set in a bright environment, and the setting height shall be consistent with the sight height of the human eye as far as possible; The height from the lower edge of the hanging and column type environmental information signs to the ground should not be less than 2m; The setting height of local information signs shall be determined according to the specific situation. The included angle between the plane of the sign and the line of sight shall be close to 90 °. When the observer is at a large observation distance, the small included angle shall not be less than 75 °.

6. Corresponding cable marker posts shall be installed at eye-catching locations at the entrance of buildings in the production site according to the safety requirements of internal equipment and media.

7. The instruction signboard "Safety helmet must be worn" shall be installed at the striking position of the main passage entrance of the production site.

How to correctly set cable marker posts? We will answer this question from seven aspects, and more related matters will come to our website http://webtest2.daoshangbao.cn Consult!