Welcome to Hengtong Electric

Company News
Home / News & Resources / Company News / Some statements about gas tracer detection

Some statements about gas tracer detection

Source: Hengtong Electric Published: 2022-07-01 0 views
Fuel gas tracer wire is a product specially designed for finding and locating underground non-metallic pipelines. This tracer wire effectively solves the problem that non-metallic pipelines cannot be detected by metal pipeline finder, and can be widely applied to the search and location of underground non-metallic pipe networks such as gas, water supply pipeline and drainage pipeline. In addition, we can briefly introduce some problems of tracer wire detection as follows:
1. After the pipeline is laid, the detectability test of the laid detectable trace line shall be carried out with the pipeline detector to ensure that the metal wire has been connected properly, and the test results shall be recorded.
2. Connect the metal wire of the tracer wire with the transmitter input end of the pipe locator, and the transmitter ground end should be as far away from the transmitter as possible. Use the grounding pile or the grounding of the electric pole to reduce the grounding resistance.
3. Using the receiver to detect and receive the transmitted signal, we can find the displacement and buried depth of the pipeline.
Characteristics of tracer wire:
1. Tracer wire: fast tracing, good waterproof, strong anti-corrosion and large tensile force.
2. Waterproof joint: good waterproof, strong anti-corrosion and convenient installation.
Gas Pipeline Tracer Wire
Advantages of tracer wire technology
1. Waterproof and anti-corrosion: HDPE insulation layer is adopted, which is the same material as the gas pipeline, and its anti-corrosion and waterproof performance is superior.
2. Tensile resistance
a. The tensile resistance of tl-5 (7mm2) directional crossing tracer cable is 6600n;
b. The tensile resistance of TL-3 (3mm2) directly buried tracer cable is 2650n.
3. Install the original product: use the middle copper column screw to compress, put the waterproof line core, and use the clamping waterproof at both ends of the shell, so as to achieve the three-layer waterproof effect. Note: only one screwdriver, one paper cutter and one adjustable wrench are required for installation.
4. Detection: the effective distance of detection and ranging is 1000 meters, and the buried depth is less than 5 meters. It is laid together with PE pipeline, and the point-to-point signal exchange is carried out between the probe equipment (pipeline instrument) and the metal core of the tracer cable, so as to measure the exact location of its underground existence, and synchronously trace the buried depth and direction of PE pipeline.
Through the above article, you can clearly understand the content of the problem. I believe that after reading this article, you can have a deeper understanding of the product and the matter. Our company http://webtest2.daoshangbao.cn There are many different types of tracer wire with different functions. If you have this demand, remember to contact us!

Related Products

  • Pultruded Fiberglass Marker Post

    Pultruded Fiberglass Marker Post

  • Roadside Utility Marker Posts

    Roadside Utility Marker Posts

  • Underground Utility Marker Posts

    Underground Utility Marker Posts

  • Underground Cable Marker Posts

    Underground Cable Marker Posts

Scan this code in WeChat