Safety warning tapes often play an indispensable role in the construction site. During the construction of buried pipelines on the construction site, our safety warning tape is laid 30 cm to 50 cm above the pipeline, which has a warning effect and is effective. It can prevent the pipeline from being damaged in the later construction and excavation process, resulting in serious accidents. It is widely used in various directly buried pipelines and cable safety protection industries.

Setting place

1. During the construction of the line, warning lines, warning signs and warning lights shall be set around the hole of earthwork excavation at night. When the construction site is on the road, warning signs should be set up according to the traffic rules or a certain distance should be kept from the construction site. Send someone to direct the traffic.

2. During the construction of the site, safety warning signs shall be set at the entrances and exits of the site, scaffolds, entrances and exits, stairs, holes, bridges, tunnels and foundation pits.

3. Obvious safety warning signs shall be set in high-voltage lines, high-voltage poles, high-voltage equipment, high-risk areas of lightning strikes, and storage places of explosives, dangerous gases and liquids.

4. Other places with safety signs.

Safety warning signs must meet the requirements of national standards gb2849-1996 safety signs, gb16179-1996 guide to the use of safety signs, and GB2893-2001 safety colors.

Setting principle

1. Emergency exits, evacuation routes, staircases at different levels between floors must be set with "safe passage" signs in public places with dense personnel on site. At places far away from the safe passage, the direction arrow of the "safe passage" sign must point to the direction of the emergency exit.

2. When constructing on roads or other places that non construction personnel often pass by, corresponding safety warning signs shall be set up in accordance with relevant traffic regulations. The technical code for safety of work at height requires that limb openings be set in buildings.

3. The standards for temporary electricity consumption shall be formulated in accordance with the relevant standards for electricity consumption.

4. The sign setting of all machinery shall comply with the provisions of special machinery.

5. The cable warning tape manufacturer reminds other places that need to set safety signs.

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://webtest2.daoshangbao.cn And consult our staff, will serve you wholeheartedly.